Elk Grove resident Barry Pope, an engineer with the city of Elk Grove, said that he went out to test the sprinkler system of his building and found his floor to become"aluminum" He then proceeded to transfer the sprinkler heads right into place, but in that time"we have a problem."

When firefighters arrived, they found that the electrical system was ruined by smoke and fire. In the procedure for fire recovery, the electrical system has been disconnected, the circuit breakers were triggered, and the main energy of the construction was cut away. As the fire raged through the construction, cables were going off the building's energy, sparking fires in the water heater and above the boiler rooms.

Fire cleanup crews began to remove the wood from the roof and flooring, which were a major source of hot spots and heat during the fire. It had been an easy undertaking, but the mold remediation of the area remained for a complicated effort, especially after the ground got wet from water running from the sprinkler system.

"In case you do not understand how to clean mold, you do not understand what to do if it comes to the fire clean from your own building," Silvester said. In cases like this, the firefighters didn't have the necessary equipment for monitoring the mold requirements, and the management group only had enough water to finish the fire cleanup a portion of the job, but a day's worth of water was sufficient to saturate the entire building.

The Elk Grove Fire Department is working to complete the fire wash up and clean up. The entire structure has to be professionally cleaned before the main power is restored. However, the mold remediation of this construction will require a fresh water system to be set up, in addition to new pump systems, to be able to adequately clean up the building.



visit here to get more information about mold remediation elk grove.